Resin Stone Paving is the perfect solution for drives, roads, paths & walkways and slopes. Resin  Stone Paving  provides an extremely durable  surface where the appearance of a stone surface is required but the stone is bound to a tarmac or concrete substrate so there are no loose stones, or likelihood of weeds growing through the surface. It is non-slip, anti-skid,  economical and attractive to look at. Most installations can be overlaid in one day, and totally transform ugly concrete and asphalt surfaces.

Benefits

• Tough and durable polyurethane resins

• Long service life compared with other similar systems

• Cold applied using mixer and squeegee

• Low hazard materials

• Resistant to oils and solvents

• Minimal maintenance

• Minimal traffic disruption

• Suitable for a wide range of substrates (asphalt, concrete, timber, steel)

• Low initial and whole life cost

• Non-slip

• Anti-skid (depending on stone used) 

• Resin  Paving is used where a decorative smooth textured stone finish is required such as  drives, balcony’s, pathways, patios, swimming pool surrounds, public building entrances where logos or patterns can be incorporated into the resin bound paving design. This system can also be installed in an interior location, with the addition of a pore filler.

  A light stable polyurethane resin is mixed with natural stone and applied to the substrate as a 10-20mm thick screed. The surface produced is smoothed by trowel, often with a scatter of fine anti-slip material. Depth is unlimited and for specific applications, such as in tree pits is laid between 40 and 50mm thick.

  Resin bound paving can have an open or closed structure depending on the need to support vehicle loads and the requirement to be free-draining (e.g. SUDS systems & Tree Pits).

  Each particle of stone is coated in resin enhancing the natural colour of the stone and protecting it from staining.  This paving system carries a 10 year guarantee.